|
|
|
◎Other common used name
Level sensor, Fuel Sensors, Fuel Switches, Fuel Level Switches and Gauges, Liquid Level Sensor, Fluid Level Sensor, Fuel Level Sensor, Fuel or Water Tank Sensors.
◎Description
Cashtec Level sensors’ main Benefits use reed switch dependability of us based inside the level tube, which is showing in our supply of fuel and coolant sensors. A float, holding ring or twin magnets, rises and falls with the liquid level and triggers a series of electronic switches housed and sealed within the tube, or a float with built in magnets then triggers the reed relays generating a potential. The float is the only moving part of the sensors, thereby minimizing potential mechanical failures. With free resistance with an ohm value that increases or decreases. All sensors are fully insulated to protect against voltage inside the tank. The benefit is liquid control, high input resistance, non-consuming and environmental of reed switch, save energy, apt to detect the volume of liquid in harsh environment. Our level sensors are non-contact sensors that can be used as a more reliable and accurate.
Our fuel sensor range has been designed to be flexible with a range of optional features that give our customers a cost effective one-stop-solution. Threaded or five hole, six hole connections, the sensors have stripped cables for you to fit your own connector, available up to 1.5m in length. Cashtec cost-competitive level sensors are ideal for tanks or storage containers that have a depth/height of 32 inches (24 inches for gasoline).
Made from a stainless steel, Aluminium Alloy, Nylon, ABS tube, they are reliable and easy to install. The system is simple and with no mechanical moving parts to wear, it is very durable and can withstand the constant movement of the chamber. Fitting is as easy as screwing in the sender and joining two wires to the gauge. At extra cost, we can supply senders to trigger any type of gauge. It works with a wide variety of media including gasoline, diesel fuel, motor oil, hydraulic fluid, ethanol, oils, fresh water, sewage water, and engine coolants. Reed Switch reliability, resistance output is fully and length of tube is customizable, or your specific application needs.
◎Feature
1. Customized length and ohm value.
2. With 0-180, 240-30 or any customize OHMS, resistances available upon request
3. Special coating on sensor head to extend the sensor life and prevent with any risk.
4. Filter for fuel is included in model No ,
5. Optional threaded NPT, M for screw in applications
6. Assembly by 5 holes or 6 holes screws in. or 1 1/4” BSP, 2” BSP thread and 2” NPT thread.
7. The range of fuel sensors we offer the reliability of proven reed switch technology housed in 304 or 316 stainless steel designs.
8. With no components to protrude into the fluid.
9. Exceeds 350 hours salt spray @35oC ,Customisable resistance output, Reed Switch reliability
10.Sensors are fully insulated to protect in IP68 standard inside the tank
11.Float is the only moving part of the sensor, minimizing mechanical failure
12. Switched power: 10W/70W
12. Switched voltage: 200VDC/250VAC
12. Switched current: 0.5A/1A
12. Breakdown Voltage: 300VDC
13. Operatering temperature: -10~80℃ (Analogue output)
◎Application
Agricultural equipment,Buses,Cars,Construction Fuel Liquid, diesel fuel and waste water volume measuring,
Low level switch alarm option,Motorbike,Overflow protection,Trucks,Warning systems for industrial tanks,Yachts, Ships,Gauges for liquid level, motor control, Temperature sensors
|
|
|
|
|
